Qseven CPU-Modules for compact System Solutions.

The Qseven concept is an off-the-shelf, multi-vendor, Computer-on-Module that integrates all the core components of a common PC and is mounted onto an application specific carrier board. Qseven modules have a standardized form factor of 70 mm x 70 mm or 40 mm x 70 mm and have specified pinouts based on the high-speed MXM connector, regardless of the vendor.

Qseven module provides the functional requirements for an embedded application, which include, but are not limited to, graphics, audio, mass storage, network and multiple USB ports. A single ruggedized 230 pin MXM connector provides the carrier board interface to carry all the I/O signals to and from the Q7 module. This MXM connector is a well-known and proven high-speed signal interface connector that is commonly used for PCI Express graphics cards in notebooks.

The Qseven concept is an off-the-shelf, multi-vendor, Computer-on-Module that integrates all the core components of a common PC and is mounted onto an application specific carrier board. Qseven... read more »
Close window
Qseven CPU-Modules for compact System Solutions.

The Qseven concept is an off-the-shelf, multi-vendor, Computer-on-Module that integrates all the core components of a common PC and is mounted onto an application specific carrier board. Qseven modules have a standardized form factor of 70 mm x 70 mm or 40 mm x 70 mm and have specified pinouts based on the high-speed MXM connector, regardless of the vendor.

Qseven module provides the functional requirements for an embedded application, which include, but are not limited to, graphics, audio, mass storage, network and multiple USB ports. A single ruggedized 230 pin MXM connector provides the carrier board interface to carry all the I/O signals to and from the Q7 module. This MXM connector is a well-known and proven high-speed signal interface connector that is commonly used for PCI Express graphics cards in notebooks.

Close filters
No results were found for the filter!
KONFIGURATOR
conga-QA5/E3940-4G eMMC16 conga-QA5/E3940-4G eMMC16
Qseven module with Intel® Atom™ x5-E3940 quad core processor with 1.6GHz core frequency up to 1.8GHz, 2MB L2 cache, 4GB 1866MT/s DDR3L onboard memory and 16GB eMMC onboard flash.
From €189.00 *
conga-QEVAL/Qseven 2.0 Evaluation Carrier Board conga-QEVAL/Qseven 2.0 Evaluation Carrier Board
The conga-QEVAL / Qseven 2.0 Evaluation Carrier Board for congatec Qseven modules based on the industry standard Qseven 2.0 enables the quick start of development projects with Qseven modules. Datasheet: conga-QEVAL/Qseven 2.0 User Manual conga-QEVAL Qseven 2.0 conga-QEVAL Interfaces The connector layout picture below shows each connector and its name designator. Qseven 2.0...
Content 1 Stück
€249.00 *
conga-QKIT - Qseven Evaluation Kit conga-QKIT - Qseven Evaluation Kit
This complete kit provides the ability to start evaluating Qseven®modules immediately. Qseven Starter Kit All accessories out of the box Immediate evaluation for Qseven Contents: 007003 conga-QEVAL/Qseven 2.0 Evaluation board for Qseven modules (rev. B.4) 011115 conga-LDVI/EPI LVDS to DVI converter board with EEPROM 033331 cab-LVDV-DAT-34-15 34-pin, 1mm pitch, 15cm ribbon...
Content 1 Stück
€799.00 *
Cooling Solution QA5/CSP-T Cooling Solution QA5/CSP-T
Passive cooling solution for Qseven module conga-QA5 with open silicon Intel Pentium and Celeron processor. All standoffs are M2.5mm thread.
€15.00 *
Heatspreader QA5/HSP-T Heatspreader QA5/HSP-T
Standard heatspreader for Qseven module conga-QA5 with open silicon Intel Pentium and Celeron processor. All standoffs are M2.5mm thread.
€15.00 *
Spacer for SMARC & Qseven Modules H=5mm Spacer for SMARC & Qseven Modules H=5mm
Standoff / Spacer for Qseven or SMARC CPU Modules h= 5 mm Solder Version with M2.5 thread. Part#: 1019
Content 1 Stück
€1.29 *
Qseven Connector H=5mm - ACES 88882-2D0K Qseven Connector H=5mm - ACES 88882-2D0K
Qseven Carrier Board Connector 230 Pin, 5mm. ACES 88882-2D0K ACES 88882-2D0K Carrier Board Connector for Qseven CPU-Modules The ACES 88882-2D0K connectors were originally developed for MXM graphics cards, but are also used to connect Qseven CPU modules with Carrier boards.
Price on request
Viewed